Déco Noel fait main, à fabriquer : 7 DIY trouvés sur Pinterest

Déco Noel fait main, à fabriquer : 7 DIY trouvés sur Pinterest

A l’aide de plusieurs bouts de ficelle et d’une branche repeinte en doré, suspendez des étoiles en papier et en bois que vous aurez confectionnées vous-mêmes. Vous pouvez aussi y suspendre des décorations ou boules de Noël achetées en magasin.

Fully covered stairs are passé. Hard wooden stairs are the way to go, but is it possible to replace the carpet on stairs with wood, without destroying the house, living under a building site for a few months at the end or selling your only child to the bank? Absolutely as long as you can answer yes to two questions!

Tearing the house apart to redo the stairs just makes no sense. In addition to building a regular set of hard wooden stairs, it probably costs four times more than taking your existing stairs and changing carpeted stairs to hardwood, in a wood species to complement the balance of your home decor. Saving thousands of dollars is not uncommon. So what do you need to answer first?

Question number one: Are your existing stairs structural sound? In other words, if I were to remove the carpet and add some (or much) screws to the existing structure, they would meet the existing building code and NOT choke in daily use. If not, give up and start from scratch before wasting more money!

Question number two: Are you satisfied with the overall design of your steps? Are they a suitable size that rises enough for each step to be safe and offers enough depth to comfortably plant your foot? Many do-it-yourself vendors and even those in commerce have problems with the mathematics used in the design of steps. They often think that when you come to replace the carpet on stairs with wood, you can also play with the overall layout by adding width to an existing set of slots. They think that if they build up the stairs front part during nosing, it will give them a longer run. They forget that if you do it for each step, it interrupts each other, so your layout must be acceptable as it is.

So, if you are happy with your existing "path and drive", then you are in the ideal position to recover the stairs. Hardwood of any kind can be used for the job, so here is a list of steps to change mat stairs to wood.

Step 1: Remove the carpet, adhesive strips and / or any remaining adhesive. Don't worry if the wood gets crushed in the process.

Step 2: Cut off existing nosing of the construction stairs on both front and if you have an open end, there too.

Step 3: Remove and store spindles that can be drilled on the stairs. Leave the new posts in place. You can work around them, unless of course your intention is to also have a new railing.

Step # 4: Use a matching hardwood veneer plywood to meet the back and ladder. It is no use to use solid hardwood here because it does not take any wear on this site and solids are much more difficult to work with.

Step # 5: Glue firm wood planks to the face of your old treads, using building glue. Glue contained in a pipeline pipe is the easiest to apply, otherwise use a small hooked spreader to spread, especially when applied to "" plywood or bolts will be obvious.

Step # 6: Replace your spindles and trim all corners with appropriate strips to hide seams between the plywood used for the riser and the one used for stringer.

Further: It is best to complete all plywood and treads before installing. Polyurethanes usually take 48 hours to come to full strength so it can tie your steps a little time if you choose to do finishing work on site. Besides that, it is easier to avoid driving if everything can be completed on the plan.

For further information on Replace steps, change carpet stairs to wood visit our website: http://www.woodsthebest.com Lots of information on how to order custom hardwood in the size, shape and wood you really want plus all the tips on how to install as a seasonal product. After all the precision woodworking is all in the details.